Home Page Our Promise Our Technology Our Products Our Support Our Education What's New Site Map Our Contact
AUTOSAMPLERS
  
 
 
 
Convergent offers 2 proven autosamplers, each with specific attributes and benefits:
  PrinCE MicroInjector   Alcott 719AL Autosampler  

PrinCE MicroInjector

The PrinCE MicroInjector is the preferred option in an environment where walk-up robustness is critical. It provides good sample throughput and requires a smaller sample volume.
 
 
  • Throughput: up to 4 - 5 injections/hour
  • Tray capacity: 40 @ 11mm vials - not microtiter plate compatible
  • Maximum injections (CFR v2.3): up to 160 in up to 60 hours
  • Typical sample volume: 10 µL
  • Refrigeration: 8°C to 40°C
  • Electrical: 115/230 VAC +/- 10%, 50 – 60 Hz
  • Size: 34.5 cm (13 5/8”) Wide x 46 cm (18”) High x 49 cm (19 1/2”) Deep

Alcott Autosampler 719AL

The Alcott Autosampler is preferred when the iCE280 system is used frequently for a large number of injections - run up to 200 samples in up to 60 hours. For even greater convenience, add the Maximizer option with continuous flow pump and 96 well microtiter plate format.

 

 
  • Throughput: up to 7 injections/hour
  • Tray capacity: 50 @ 15mm vials or 96 well microtiter plate
  • Maximum injections (CFR v2.3): up to 200 in up to 60 hours
  • Typical sample volume: 40 µL
  • Refrigeration: 8°C to 40°C
  • Electrical: 115/230 VAC +/- 10%, 50 – 60 Hz
  • Size: 32.5 cm (12 3/4”) Wide x 33.5 cm (13 1/8”) High x 55 cm (21.5”) Deep